×
Service online
✉️E-mail: 💬WhatsApp: +86 18011793320
💡
  • Thuis
  • Blogs
  • Dosisnauwkeurigheid poederstickpakket: Hoe bulkdichtheid, Vloeibaarheid, Deeltjesgrootte en doseringsmethoden beïnvloeden de vulprecisie

Dosisnauwkeurigheid poederstickpakket: Hoe bulkdichtheid, Vloeibaarheid, Deeltjesgrootte en doseringsmethoden beïnvloeden de vulprecisie

In single-serve stick pack production, nauwkeurigheid van de dosis means each sachet gets the correct amount of powder. In de praktijk, variations often arise from the powder’s own properties and the way we feed it. Bijvoorbeeld, two different powders – say a free-flowing vitamin mix versus a samenhangend protein powder – can behave very differently in the same machine. If one powder has a lower bulk density or tends to clump, the fill weight will drift. Kortom, bulkdichtheid, vloeibaarheid, deeltjesgrootte, en de doseringsmethode work together to determine the actual fill weight. Understanding and controlling these factors is key to keeping each stick pack within tolerance.

En Jeinlu plukken, we often show customers how these factors play out. In a recent on-site test, our engineers helped a French nutraceutical firm fill 10 g stick packs (30–35 packs/min) of vitamin powder and eiwit poeder. Using an interchangeable auger ontwerp (short screw for the vitamin, long for the protein), the machine hit an impressive 98.7% fill consistency for that trial. This one case highlights that with the right setup, even tricky powders can meet tight accuracy – but it also makes clear that precision depends on the powder and settings. In this article we’ll explain the main causes of fill variability and practical ways to improve powder dosing accuracy in stick-pack machines.

Poederstickverpakkingsmachine met roestvrijstalen trechter, meerbaans vulsysteem en touchscreen-bedieningspaneel

 

Why Powder Stick Pack Dose Accuracy Matters

Accurate dosing is critical in industries like pharmaceuticals and nutraceuticals. Underfilling a sachet risks regulatory non-compliance or unsatisfied customers; overfilling wastes expensive material. Bijvoorbeeld, A 0.5% reduction in giveaway (excess powder dispensed) can save thousands of dollars per month. Manufacturers often target a fill error within ±1–2% or better. One way to quantify this is by the fill error formule:

Fill Error (%) = (|Actual Weight − Target Weight| / Target Weight) × 100

Bijvoorbeeld, a 10 g target with ±0.1 g variation is a 1% fout. Meeting these specs means accounting for all sources of variation. Bulk density shifts or a change in particle flow can easily push a standard volumetric auger off-target by more than 1%. That’s why we must understand Wat causes inconsistent fills:

  • Bulk density changes– If the powder packs more or less densely, the same screw rotation delivers different mass.
  • Flow problems– Bridging, rat-holing or caking can intermittently starve the auger, causing uneven fills.
  • Particle size effects– Very fine powders or mixtures with wide size ranges may segregate or trap air, changing flow behavior.
  • Dosing control– An open-loop volumetric auger assumes a fixed volume; any density variation shows up as weight error. A gravimetric (weight-based) system can adapt, but no system is magic.

Getting each sachet right means combining good machine design with the right settings and procedures. We’ll discuss each factor in turn, then cover seven practical tips to tighten up dosing consistency.

Two powder stick packs with loose powder, illustrating the importance of accurate powder filling and dose consistency.

 

How Bulk Density Affects Filling Accuracy

Bulkdichtheid is the mass of powder per unit volume (g/ml). In verpakking, powders may have a “loose” (fluffed) density and a “settled/tapped” density. If powder in the hopper shifts from a loosely packed state to a more compact one, the weight per turn of the auger changes. Van kracht, an auger filler meters a volume – if that volume suddenly holds more or less powder, the fill weight varies.

Bijvoorbeeld, imagine a vitamin powder with a bulk density of 0.5 g/ml. One auger turn moves X ml, so you expect 5.0 g (voor 10 ml). But if during production the powder vibrates and its tapped density increases to 0.55 g/ml, the same volume now holds 5.5 g – a +10% overshoot unless corrected. Omgekeerd, aeration or refill could loosen it and cause underfill.

Factors like hopper refill, trillingen, or moisture can change density between refills. In de praktijk, operators measure both loose and tapped densities during trials. A common index (the Hausner ratio or Carr’s index) quantifies how much bulk density can change under tapping or compression – higher values mean more variability. If a powder shows large density swings, the auger must be re-calibrated for every batch, or a gravimetric system with weight feedback should be used.

Control tips: To minimise density-induced error, keep the hopper consistently filled and minimise vibration/amplitude after filling. Use level sensors and agitation to reduce settling. Voor gevoelige producten, a loss-in-weight (weighing hopper) system can continuously adjust for density drift. In het algemeen, stable bulk density means easier volumetric dosing; variable density demands careful testing and compensation.

Comparison of low and high bulk density powder in measuring beakers, illustrating the impact of powder density on stick pack filling accuracy.

 

Powder Flowability Issues: Overbrugging, Rat-Holing, Caking, en meer

Poor powder flowability can cause unpredictable stops and starts during filling. Common flow problems include:

  • Bridging/Arching:The powder forms a stable arch over the hopper or feed outlet and flow stops, even with material above. Flow suddenly clogs until jostled. On a stick pack machine, bridging means the auger can’t fill, so you get empty or underfilled sticks. (This happens most with cohesive powders.)
  • Ratholing:A narrow channel of powder flows down while the surrounding material stays stagnant. This reduces the effective flow rate. In de praktijk, one lane or cycle may get its fill, while nearby pockets of powder remain stuck. Ratholing leads to erratic feed: some packs underfill while others overfill as the “rat hole” collapses unpredictably.
  • Caking/Compaction:Powders stored for a while (especially humid ones) can form hard lumps or a solid “cake.” This destroys flow entirely until broken up. Picture a jar of powdered sugar that’s become rock-hard – trying to feed that into an auger is futile. In production this shows up as line jams after idle periods or when new powder is fed.
  • Aeration/Fluidization:Freshly moved powders often trap air. An aerated powder is lighter and might surge out of the auger (causing overshoot) or pack loosely (undercutting weight). As the air escapes, the density changes. This shifting aeration can make fills heavier as the run continues. Powder beds compress under their own weight (the upper layers weight down the lower, raising density), changing flow with hopper level.
  • Speed Sensitivity:Some powders flow differently at different speeds. If you change fill speed, the powder might run in or starve. Bijvoorbeeld, in testing, fill weights often change when the line speed is raised or lowered. A formulation that runs fine at 30 bags/min might start drifting at 40 bags/min if it’s speed-sensitive.

Each of these flow issues translates to dosing error or downtime. Bridging and rat-holing cause missing fills; caking requires line clearing; aeration causes drift; speed-dependence causes inconsistency. To guard against them, many machines use agitators or vibrators in the hopper, proper hopper wall angles (steep sloping) and even inserts (paddles) to break cohesive clumps. Incorporating sensors or high-precision checkweighers in-line can catch if one lane is underperforming due to a flow issue, prompting immediate correction.

Illustration of powder flowability issues in hoppers, showing rat-holing, bridging and arching, and powder caking

 

Particle Size Distribution and Segregation

The mix of particle sizes in your powder blend can greatly affect fill uniformity. In het algemeen, fine particles pack more tightly – they can flow into the voids between larger particles. This raises bulk density (tot op zekere hoogte) but also tends to make the powder more cohesive. Think of very fine flour vs. coarse sugar: meel (tiny particles) compacts and clumps easily, while coarse crystals pour easily but leave more voids. Fine particles can fill the voids between larger particles and change the blend’s bulk density. Echter, excessive fines may also increase cohesion and reduce flowability, making consistent auger feeding more difficult.

A broad particle size distribution can also lead to segregatie tijdens het vullen. Coarser particles might roll or separate from fines in a hopper or during vibration, so some sticks get more fines and some get more coarse granules. This uneven mix means the active ingredient per stick can vary even if total powder weight is correct. Bijvoorbeeld, if a blend of vitamins and fibers segregates, some sticks may carry less vitamin just because the tiny vitamin particles settled differently. Consistent fill weight does not automatically guarantee content uniformity. If a powder blend segregates during handling or feeding, individual stick packs may contain different proportions of active ingredients even when their total weights are similar.

Samengevat, an ideal powder for stick packs often has a controlled blend of sizes: enough fines to pack well but not so many that it cakes or binds. Manufacturers often test with representative powders to catch these effects – what looks uniform in bulk may behave very differently during filling.

 

Dosing Methods: Auger, Volumetric and Gravimetric

The dosing system (how the machine meters the powder) is equally crucial. The main approaches are volumetrisch (vijzel) En gravimetrisch (fill-by-weight), Auger describes the feeding mechanism, while volumetric and gravimetric describe how the dose is measured or controlled. Een vijzel vuller can operate as a volumetric system or be integrated with gravimetric feedback. Each with pros and cons:

Dosing Method Hoe het werkt Speed vs Accuracy Opmerkingen
Volumetric Auger (open-loop) Dispenses a fixed volume per auger turn (preset revolutions or time). Hoge snelheid, moderate accuracy: Depends heavily on powder density and feeding consistency. Simple and fast. Accuracy drops if powder density or flow changes (no feedback). Best for free-flowing, uniform powders or when ±2% is sufficient.
Auger with Weight-Feedback Starts volumetric, then uses a scale to fine-tune each dose. Medium speed, hoge nauwkeurigheid: Can compensate for weight deviations through feedback control. Two-stage fill: fast bulk portion, then slow “dribble” to target. Mitigates density shifts via closed-loop control. Slower cycle due to weighing.
Volumetric Cup or Piston Fixed cavity or piston volume (mechanical stroke) per fill. Hoge snelheid, moderate accuracy: Depends on consistent bulk density and cavity filling. Good for granules or pellets. Subject to similar density issues as augers. Often used for free-flowing products.
Gravimetric (Loss-in-Weight) Continuously weighs hopper and stops when target mass dispensed. Medium speed, highest accuracy: Measures actual mass and can provide tighter weight control. True closed-loop: measures actual mass out. Excellent for varied densities. More complex and costly. Best for pharma/regulated.

Fill-by-Weight vs. Volumetric: In de praktijk, “fill-by-weight” systems refer to augers coupled to a weigh cell (gravimetrisch). These start fast and automatically slow/stop at target weight, giving exceptional accuracy (often ±0.5% or better). They cost more and run slightly slower due to the weigh-feedback step. Traditional volumetric augers simply turn the screw a set amount, relying on powder consistency. They can be very fast (no pause for weighing) but typically average ±1–2%.

Auger = mechanism, not a mutually exclusive method. An “auger filler” is basically a volumetric system, but you can also have an auger with closed-loop feedback. Gravimetric dosing may use augers, meerkoppige wegers, or other methods. De sleutel is: volumetrische dosering depends on bulk density; gravimetric dosing depends on real weight. You often see machines advertised as either volumetric or “augment fill-by-weight”.

In beide gevallen, advanced auger systems use servo motors and smart controls to improve consistency. High-resolution servo drives ensure each screw revolution is precise and repeatable. Maar onthoud: even a servo won’t magically fix a powder that densifies or bridges. It just runs the screw exactly as told. A system can combine a servo auger with a load cell: the servo handles precise volume, and the weigh cell confirms or fine-tunes the weight in real time.

 

7 Practical Ways to Improve Powder Stick-Pack Filling Accuracy

  1. Optimize Auger Design:Use the correct screw geometry for your powder. The pitch (spacing of flights), diameter and length of the auger affect how much powder is moved each turn. Sticky or cohesive powders often need a steeper or deeper auger to pull material out, whereas free-flowing powders may use a shallow one. Sommige machines (like Jinlu’s with interchangeable augers) let you swap a short, steep screw for free-flowing vitamin powder and a longer, gentler screw for creamy protein powder. Always calibrate the machine with the actual auger, nozzle and settings you plan to run.
  2. Maintain Steady Feeding:Keep the powder flow constant into the auger. Gebruik hopper agitators or vibrators to prevent bridging at the inlet. A level hopper (not nearly empty or overly full) helps too: as a hopper empties, powder might cascade differently into the screw, affecting density. Indien mogelijk, auto-feed from upstream feeders or weigh bins to keep a constant head of powder.
  3. Control Fill Speed and Cycle Profile:Many high-accuracy fillers use a two-stage dose: a fast fill and then a slow dribble to fine-tune. This minimizes momentum overshoot. If your machine supports it, slow down the auger near the end of each fill or use a proportional valve to trim the dose. Ook, avoid extreme speeds if the powder is flow-sensitive – faster line speeds can sometimes induce a fill drift.
  4. Manage Powder Aeration and Compaction:Let powders deaerate before filling if possible. Bijvoorbeeld, pause briefly after loading a new batch or use a gentle vacuum flow in the hopper to settle the powder. Some high-end fillers even have a “coating” vacuum at the nozzle to prevent dust spillage. Prevent excessive compaction and break up soft agglomerates using suitable agitation or hopper-flow aids. Avoid excessive vibration or mechanical pressure, which may further compact certain powders. The goal is a repeatable bulk density: not too fluffy, not too compressed.
  5. Minimize Post-Fill Dribble:Use anti-drip measures so powder doesn’t leak after filling stops. Sleeve nozzles and cut-off discs can catch the last few grains. Voor stickpacks, a well-designed filling spout (sometimes with vacuum) prevents powder trails that rob weight and contaminate seals. Een schoon, drop-free cut leads to consistent fills.
  6. Use Checkweighing and Feedback:Incorporate an in-line checkweigher or gravity scale after filling to verify each pack’s weight. This isn’t to replace a good auger, but to catch any drift and trigger a quick stop or adjustment. For tight tolerances, a modern system will adjust the auger in real time based on weight feedback. If you see gradual drift (a known issue when powders aerate or settle), pause and recalibrate. De sleutel is om measure what you fill, not just rely on the setpoint.
  7. Calibrate and Validate with Actual Powder:Never assume water or free-flowing test powders mimic your real blend. Always commission the machine using the true powder and dose. Record the calibration data (auger turns, recipe settings) along with the lot conditions (vochtigheid, hopper fill level, enz.). Na het instellen, verify by weighing sample sticks – and do it again after a refill, at speed change, or every few hours. Zoals een branchegids opmerkt, fill weights often drift because “powder aerates, settles, compacts, bridges, absorbs moisture or changes hopper level… the auger may turn the same amount but the mass of powder in each flight can change”. Regular checks keep errors small.

Implementing these steps – good screw selection, stable hopper flow, careful cycle control, and diligent testing – can dramatically cut variation. Zelfs dan, some variation is inevitable; the goal is to know and control it. In Jinlu’s on-site test with a French customer, they demonstrated this: by switching to the right auger for each powder, they hit 98.7% of sticks within target at 30–35 sticks/min, 10 g dose. This shows the difference smart setup and feedback can make.

 

How to Choose a Powder Stick Pack Machine for Accurate Dosing

When selecting a machine, consider both the powder and your production needs:

  • Schaal en doorvoer:How many sticks per minute do you need? Multi-lane stick pack packaging machines multiply throughput – for example, a 16-lane Jinlu model can reach 720 stokken/min (45/min per lane). Als je dat nodig hebt >200–300 ppmin, a multi-lane system is likely best. Maar let op: each lane is essentially its own auger and fill head, so consistency across lanes is vital. All lanes should have identical screws and settings, and the machine’s PLC will keep them synchronized. Very high-speed multi-lane lines also often include central weight checking (like Jinlu’s integrated weighing/bag arranging unit with ±0.02 g per pack) to ensure inter-lane uniformity.
  • Poederkenmerken:Is your powder free-flowing or sticky? Free-flowing powders (protein mixes, zouten) do well on high-speed volumetric augers. Sticky/cohesive powders (fine pharmaceutical blends, moist powders) may require slower dosing, roerwerken, or even a weigh-filler approach. If you need to run very different powders (like a light vitamin versus a dense protein), look for machines with tooling change and fast cleanability – e.g. quick-release augers, modular nozzles and vacuum loaders as in our French case study.
  • Target Dose:Smaller doses (bijv. <1 G) are harder to control. Machines often have minimum dose ranges. For tiny sachets, a precise micro-auger or even a vacuum/flow-past system might be necessary. For larger doses (10–30 g), standard augers are fine. Real-world accuracy will depend on your powder, mondstuk, en snelheid. Always verify with test runs.
  • Environment and Compliance:For pharmaceutical or supplement manufacturing, choose machines built to GMP standards: roestvrijstalen contactdelen, clean designs to avoid powder accumulation, en eenvoudige reiniging (CIP). Also consider extra features: integrated dust extraction or nitrogen purge if powder is oxygen-sensitive. Many Jinlu models are cGMP-compliant with SS304/316 construction.
  • Versatility and Integration:If you plan to expand product lines, a modular or multi-function machine can be useful. Bijvoorbeeld, some systems can switch between volumetric and gravimetric modes, or handle both powders and granules. Also consider up- en stroomafwaartse apparatuur: A stickpack-machine makes sachets, but do you need an in-line karton? Jinlu offers stick-pack cartoning lines (grouping sticks into boxes) that are engineered to sync perfectly. Ensuring each stick is weighed and grouped automatically further reduces errors in the final packaged product.
Powder Sachet Stick Packing Machine
Powder Sachet Stick Packing Machine

Samengevat, match the machine to the product and line speed. When accuracy is paramount, look for machines that allow realistic product trials before purchase. Opstaan, bijvoorbeeld, often conducts customer trials with client powder. And remember the trade-off: a Gravimetric (wegen) machine will usually beat a pure Volumetric one on accuracy, but at the cost of speed and complexity. Decide whether your priority is absolute weight control (pharma standard) or maximum throughput (high-volume consumer goods).

 

Conclusie

Consistent stick-pack dosing starts with understanding your powder’s properties and choosing the right filling approach. Bulkdichtheid, flowability and particle size can each cause weight variations – but by preparing (testing powder behavior, selecting appropriate augers, using agitation and feedback), you can greatly tighten fill precision. As seen in Jinlu’s case, even challenging powder combinations reached 98.7% consistency once the right augers and controls were used.

If you’re sourcing a stick-pack machine, look for features that match your product: adjustable or interchangeable screws, servo-driven dosing, and integrated weighing or checkweigher systems. Always test with real product samples. En onthoud, published specs (like ±0.02 g accuracy) are usually under ideal lab conditions – confirm with the supplier what materials, speeds and methods were used to achieve that.

With informed setup and tuning, your stick packs can reliably hit target dose – minimising waste and meeting both quality standards and customer expectations.

Looking for a reliable powder stick-pack solution? Contact Jinlu Packing’s team to discuss your powders, target fill weight and output needs. We can help configure a stick-pack machine with the right auger, feeding system and controls to achieve the accuracy your production requires.

 

FAQs on Powder Stick Pack Dose Accuracy

What are the main causes of fill weight variation in stick pack machines?

By far the biggest culprits are changes in bulk density and flow behavior. If the powder settles or aerates, the same auger rotation delivers different mass. Bridging or rat-holing stops flow unexpectedly. Even small changes – a few percentage points in bulk density, or a slight humidity gain – can shift fill weight. Mechanical factors like loose feeders or speed changes also cause variation. In de praktijk, any time the powder’s state or the machine settings change, you should re-check the fill weight.

How does bulk density specifically affect powder dosing accuracy?

Bulk density sets the conversion between volume and mass. Auger fillers deliver a fixed volume per turn. If bulk density increases, the delivered weight rises in proportion. Bijvoorbeeld, a 0.10 g/mL increase in density in a 10 mL dose adds 1.0 g to a 10 g pack (10% fout). This is why volumetric systems assume steady density; any fluctuation directly turns into weight error.

Can a high-precision servo-driven machine eliminate powder effects?

Servos improve repeatability (each turn is exact), but they cannot change the powder’s physics. A servo auger will spin exactly N turns every cycle, but if the powder has compacted or bridged more this cycle, the mass in those turns is just different. Servo control reduces mechanical error (backlash, slip) but a cohesive powder can still underfill or jam. That’s why good design (hopper shape, agitatie) and sometimes weight feedback are also needed.

How can I reduce fill weight variation without buying new equipment?

Focus on process adjustments: ensure the hopper is kept at a stable level and agitated so density stays uniform. Add a gentle vibration or aeration between runs. Slow the fill-down speed for critical fills. Use anti-bridging inserts in the hopper. Calibrate often with the actual powder condition. And don’t forget the checkweigher – adding a weight check after filling can catch outliers and allow rejection or correction without a big hardware upgrade.

What’s the difference between an “auger filler” and “volumetric” or “gravimetric” fill?

An auger filler refers to the mechanism (a rotating screw). Augers are usually volumetric by default – they deposit a set volume. “Volumetric” means open-loop (no weight feedback) – the machine doses by preset auger turns or time. “Gravimetric” means fill-by-weight – it uses a scale. Many modern auger fillers combine both: they run quickly then use a scale to fine-tune (sometimes called “weigh-fill”). So an auger machine can be volumetric-only or outfitted with weighing for gravimetric feedback.

How precise can stick pack machines be?

It depends on the model and conditions. Some high-end stick packers advertise ±0.02–0.1 g tolerance. Bijvoorbeeld, Jinlu’s single-lane stick packer specs claim ±0.02 g accuracy with a long auger. In real operations, the actual percent error also depends on your fill weight. A ±0.02 g error in a 10 g pack is ±0.2% – very good. Bulkier packs (say 100 g) might expect around ±0.1–0.5 g (±0.1–0.5%). Multi-lane systems often quote a percentage (like ±2%) based on trials. Always check if the spec is volumetric-only or with scale feedback, and test with your powder.

Can one stick pack machine handle multiple different powders?

Ja, but with caution. Many stick packers allow quick changeover of the feed parts. In the French case above, one machine ran both free-flowing vitamin powder and sticky protein by swapping the auger screw and re-tuning settings. Modern machines use quick-release feed hoppers, tools and vacuum feeders so cleanout and reconfiguration take minutes. Echter, each new powder usually needs its own calibration. To smoothly handle multiple SKUs, use separate augers/nozzles and keep changeover procedures precise (and document them).

What factors should I prioritize if I need very high accuracy?

Voor <±1% accuracy, consider a fill-by-weight system or at least auger plus checkweigher. Also prioritize powder conditioning: remove air (bijv. mild vacuum), avoid bridging (trillingen), and use a fine 2-stage fill. Powder uniformity and pre-blending matter too – a consistent blend will fill more consistently. Eindelijk, invest in good sensors (laadcellen, level probes) en controlesystemen. Even the best auger won’t outdo a gravimetric filler with a dynamic feedback loop if sub-0.5% is nodig.

How often should a powder filling machine be calibrated?

Calibration frequency depends on usage. For critical applications, it’s wise to do a brief verification (catch-and-weigh) at the start of each run or batch. If the machine has a gravimetric system, it self-calibrates continuously. But even then, periodic verification with a known weight sample is good practice. Whenever you switch powders or fill weights, re-calibrate in case the relationship has changed.

How can I prevent bridging in my stick-pack hopper?

Use mechanical agitation or vibration to break up arches. Keeping the hopper well-packed (with sidewall scrapers) and avoiding sharp corners reduces bridging. Some stick pack hoppers have flexible rubber inserts or shaking devices for this purpose. Also ensure the powder isn’t too moist or compacted – controlling humidity and handling helps.

 

 

Referenties:
1.Bijlage 13 Bulk Density and Tapped Density of Powders General Chapter —— FDA / ICH Q4B
2.A systematic comparison of four pharmacopoeial methods for measuring powder flowability —— WetenschapDirect
3.An investigation into the effects of excipient particle size, blending techniques and processing parameters on the homogeneity and content uniformity of a blend containing low-dose model drug —— PubMed Centraal
4.Risks of Powder Flow Obstruction in Hopper and Bin Discharge in Solid Dosage Form Manufacture should be Predicted Under The Active Stress State —— WetenschapDirect
5.Investigation on the impact of powder arching in small die filling —— PubMed
6.Continuous powder feeding for pharmaceutical solid dosage form manufacture: a short review —— PubMed
7.Influence of refilling on dosing accuracy of loss-in-weight powder feeders in continuous manufacturing —— WetenschapDirect

Deel dit artikel:
Afbeelding van Kleine fu
Kleine fu

Kleine fu, Oprichter van Jinlupacking, brengt over 20 jarenlange expertise in de farmaceutische machinesector. Onder zijn leiding, Jinlu is uitgegroeid tot een vertrouwde leverancier die design integreert, productie, en verkoop. Petty is gepassioneerd over het delen van zijn diepgaande kennis van de sector om klanten te helpen bij het navigeren door de complexiteit van farmaceutische verpakkingen, ervoor te zorgen dat ze niet alleen apparatuur ontvangen, maar een echt one-stop-servicepartnerschap, afgestemd op hun productiedoelen.

Inhoudsopgave

Stuur uw aanvraag

Laat een reactie achter

Uw e-mailadres wordt niet gepubliceerd. Verplichte velden zijn gemarkeerd *

Ontvang een gratis offerte

*Wij respecteren uw vertrouwelijkheid en alle gegevens zijn beschermd. Uw persoonsgegevens worden uitsluitend gebruikt en verwerkt voor de JL-oplossing.